The grand event kicked off, and the Star City surged. On May 12, 2023, the 3rd Changsha International Construction Machinery Exhibition 2023 was grandly opened. 1,500 exhibitors from all over the world gathered at the Changsha International Convention and Exhibition Center to continue the grand occasion of the Changsha exhibition. In this super "flow" gathering place, SUNWARD presented 6 categories of over 50 types of equipment independently developed, including underground engineering equipment, excavation machinery, high-altitude machinery, emergency rescue equipment, crushing and screening equipment, and navigation equipment. Among the many exhibits, more than half are new products, and 20 electrified products focus on showing the public the achievements of the SUNWARD brand in high-end, intelligent and green development.

Focus on "high-end, intelligent, green"
The new generation of construction machinery is favored
Entering the SUNWARD outdoor exhibition area, super equipment such as extended-range rotary drilling rigs, fully hydraulic crawler pile frames, full-rotation casing drilling rigs, mining excavators, and crawler-type cone crushing stations stand tall, among which there are many green products.

"This SWDM240EE extended-range rotary drilling rig is newly developed. The energy utilization rate in the pure electric mode is more than 50% higher than that of the traditional diesel version, and the construction cost can be greatly saved." The relevant person in charge of SUNWARD's basic equipment business department introduced, not only The energy utilization rate is high, and the device also realizes the intelligent independent decision-making control of energy and power, which is truly smarter, more environmentally friendly and more efficient.


Not only the SWDM240EE extended-range rotary drilling rig, as one of the earliest companies in China to start research on electric construction machinery, SUNWARD also exhibited a total of 20 electric products such as electric excavators and all-electric scissor aerial work platforms. These devices have the advantages of high efficiency, energy saving, and environmental protection. For example, the electric excavator SWE240FED can run continuously for 7 to 8 hours on a single charge, and the fast charging time does not exceed 1.5 hours. The output efficiency of the motor is as high as 90%, which is twice as saving as that of traditional fuel engines. many. Another electric product, SWSL0807AC-A, is an all-electric scissor-type aerial work platform, which uses a high-thrust electric cylinder instead of a hydraulic cylinder, completely cancels the hydraulic system, and saves more than 30% of equipment power.

In the E2 hall of the exhibition room, the live demonstration of a smart device attracted many audiences to stop and watch - under the wireless remote control of the staff, this scissor-type aerial work platform performs lifting and steering actions. "This is also the product we will focus on exhibiting this time. It can realize functions such as intelligent obstacle avoidance, top collision avoidance and wireless remote control, and also adds identification functions." The person in charge of SUNWARD's high-altitude machinery business department introduced that this latest development The advanced SWSL1412HD intelligent remote control scissors are suitable for various complex working conditions, especially dangerous special working conditions such as fire protection, explosion-proof, emergency rescue, etc., which greatly guarantee the safety of operation and construction.

It is understood that among the 6 categories and over 50 types of equipment exhibited by SUNWARD this time, more than five are newly developed new products, including many internationally leading high-end equipment products, such as SWCH390H-90M full hydraulic crawler pile frame, whose core technology is The world's first, solves the pain points of large-scale equipment disassembly and transportation, improves its safety and stability, and wins favor in domestic and foreign markets; the most eye-catching Shanhe Arola SA60L light sports aircraft, the flight performance and safety have reached the international advanced level , is China's first national brand light sport aircraft that has passed the airworthiness certification of China's civil aviation. Although this appearance is the second time to stand on the "booth" of the Changsha Exhibition, the popularity remains undiminished. Many audiences raised their cameras to take pictures with it Take a souvenir.
Positioning "serialization, complete set"
Committed to becoming a "comprehensive solution provider"
The current construction machinery market has developed from the original demand for a single general-purpose model to a diversified demand structure and an overall solution for construction technology. SUNWARD, which has the gene of "leading innovation", has also been committed to providing comprehensive solutions for customers. In this year's Changsha exhibition, many serialized and complete sets of products of SUNWARD were unveiled.

At the exhibition site, the demolition "star" SWR280 demolition robot with both appearance and strength "out of the circle". Small in size, light in weight, and flexible and reliable in operation, it can be used in emergency rescue fields such as earthquake rescue, nuclear emergency response, tunnel collapse rescue, and construction operations in dangerous and harsh environments. In addition to demolition robots, SUNWARD also brought emergency rescue equipment such as forest fire isolation zone tree opening machines, modular forest fire trucks, intelligent remote control wheel loaders, and 5G remote control simulation training smart platforms, and systematically demonstrated its capabilities in the field of emergency rescue. Hard core strength. According to reports, SUNWARD emergency rescue equipment series products cover water, land and air fields, and can carry out all-round and remote-controlled special operations, greatly improving operating conditions and eliminating casualties in dangerous and harsh environments.

Excavators, as equipment widely concerned by the public, have always been the focus of exhibitors. At this exhibition, all 11 F-series excavators of SUNWARD "attended". The new generation of F series excavators has a more complete functional configuration, adopts the positive flow control system and SUNWARD's third-generation control technology, greatly improves the control and efficiency, and demonstrates Sunward's high-end product image of "high configuration, high efficiency, and high reliability". Among them, the two excavators SWE600F and SWE650FB are called "Mine Duo". The former is equipped with top-level mine-enhanced working devices, which can easily solve the difficult construction conditions of heavy loads in various mines; "Broken King", the crushing pipeline is increased to 1.5 inches, and the crushing effect is fully upgraded. The two pieces of equipment won the title of "TOP50 Jury Award" and "National Heavy Equipment" respectively for the annual product of China Construction Machinery.


SUNWARD high-altitude machinery also sent a series of products to participate in the exhibition. Its successfully developed articulating arm type, straight arm type aerial work platform, electric scissor type, off-road scissor type, telescopic arm forklift and other series have representative products on site. debut. "Our products cover a working height of 4 meters to 46 meters, not only fully covering the domestic market, but also exported to high-end markets in Europe and America." The person in charge of SUNWARD's high-altitude machinery business department said that in the future, crawler-mounted, vehicle-mounted, spider-type, mast The column-type aerial work platform continuously expands the product spectrum and forms the most complete industrial chain of SUNWARD aerial machinery.

In this exhibition, SUNWARD exhibited the crawler cone crushing station, multi-cylinder cone crusher and other crushing and screening equipment for the first time. "We provide full-process services of project planning, design, construction, operation management, technical support, and spare parts supply for green smart mines, sand and gravel aggregate processing, solid waste treatment and other sand and gravel industry fields." The person in charge of the subsidiary Shanhe Pushile According to the introduction, the company is committed to becoming the world's leading expert in comprehensive material handling solutions, and has continuously made new breakthroughs in intelligent and green development. Last year, it rolled off the world's first remote intelligent cockpit SP ICC for crushing and screening, and a new generation of 500 tons of special equipment for intelligent hard rock line, creating a precedent for intelligent interconnection application in the field of crushing and screening construction.

"Providing comprehensive solutions for customers has always been the characteristic of Sunward." The relevant person in charge of SUNWARD introduced that the company has formed product clusters such as underground engineering equipment, excavation machinery, green mining and smelting, lifting and high-altitude machinery, and emergency rescue equipment. "Through the collaborative innovation of equipment, engineering, and construction methods, we have developed more than 20 types of underground engineering equipment with more than 100 models, and provided comprehensive solutions for solving key technology and complete equipment problems in underground engineering construction. The overall technical level and product quality The completeness of the series is in the leading position in the world." The person in charge gave an example that this year, the super rotary drilling rig overcame the difficulties of "strong wind, high waves, deep water, rapid current, bare rock" and other problems, and built the largest span road-rail bridge in the world. ——The Xihoumen Highway-Railway Bridge on the Yongzhou Railway set a world record for the largest hole diameter with a depth of 60 meters and a diameter of 4.5 meters. "This is a classic case of our comprehensive solution."
It is reported that during the exhibition, SUNWARD will also hold a customer exchange meeting in the industrial city, invite customers to their homes, and focus on demonstrating the innovative strength of major product clusters.
Focus on internationalization
The performance of overseas markets has increased rapidly and more blooming
This year's Changsha exhibition has a more international style, attracting 180 international brand companies to participate in the exhibition. SUNWARD displayed on the same stage also exhibited many international best-selling models, such as SWCH390H-90M fully hydraulic crawler pile frame, which ranks first in the market share among models of the same level in Korea; UF series tailless excavators have strong comprehensive competitiveness and are European and American markets are popular "star" products.

SUNWARD is one of the earliest construction machinery companies in China to explore internationalization. In 2005, excavators were exported to European and American developed countries in batches with independent intellectual property rights, independent brands, and complete machines. In 2021, the total sales volume in the European market will exceed 20,000 units. With years of deep cultivation in overseas markets, many of its product categories have been sold overseas. Among them, the static pile driver ranks first in the global market holdings and market share. The overall technical level of pile frames is internationally leading, and its market share in Korea No. 1 for many years; as a "rising star", high-altitude machinery is also sold well in more than 40 countries and regions. In the first quarter of 2023, overseas sales increased by more than 400% year-on-year.

"In 2022, the export sales revenue of construction machinery will increase by 69% year-on-year, and the overall annual revenue from the international market will account for about 40% of the company's total revenue, which is a record high." The person in charge of the SUNWARD International Market Development Center said that in 2023, the company's exports will remain stable. Strong growth momentum, export sales revenue in the first quarter increased by 84% year-on-year. The product sales category has also expanded from excavators and basic equipment in the past to rock drilling equipment, high-altitude machinery and other equipment; in terms of regional expansion, it has not only steadily improved in mature markets such as Southeast Asia, Europe, and North America. More countries and regions in South America and Africa have a new layout and development. In the next stage, we will continue to improve our overseas layout, continue to promote the construction of international financing channels and online promotion, continuously improve our technical strength, and achieve greater development in overseas markets. Editor / Zhao E
Comment
Write something~